diy awning tutorial...

Thanks for all the awning love everyone! :)
If you're not into DIY details, and just want pretty pictures check out the awning reveal.
It's rained for three days and it's working just like an awning should!
 I always hold my breath with diy projects like that, never knowing for certain how
they'll perform in the end. This is totally off subject, but that reminded me...remember last
 March when I painted my bathroom fixtures and shower surround - they are still holding
 up perfectly after six months. I'll let you know on the awning.

Step 1 - Frame
Find a student enrolled in a welding course to construct a frame for you, if they happen
 to be your awesome neighbor that's best! They're easy to find, check out this article from
 The Denver Post, 'Welding is the new hot course on campus.'  

I played around with cardboard and duct tape to construct a mock up to determine
 the right size. You'll want to consider the width, drop and projection.
Mine measured 64" W x 13" D x 18" P
Our trim above the door dictated our measurements, if given a choice I would
have chosen a longer drop. My 'awning prototype' post shows several examples of
different styles.

 We purchased Weldable Square Steel Tubing from Lowes here.
I went on vacation and left the rest to the pro and he constructed it to the specifications of the
 mock up and also painted it for me, a great idea, it's dirty, and you'll be handling it a lot.
Our size required 4 - 6' pieces @  $22 ea. = $88

Step 2 - Fabric Cover

I purchased 2 yards of a classic black and white stripe outdoor fabric.

Use the frame to make a pattern for the end pieces, add 1/2" seam allowance to all the edges

before cutting your fabric. Line your pattern up with the edge of the stripes, your seam

 allowance should extend past the edge of the stripe. Measure for the additional length of your

 awning that will fall below the frame. I chose 8", but it will vary depending on the size and

 scale you like. Cut two, one for each end. 

I'm sorry I didn't take a picture of measuring for the main piece of fabric, but it's super easy, 

 the width of your frame + 1" for seam allowance X the height of your frame + the 

amount of fabric you want to fall below the frame, again I chose 8" + 1" seam allowance.

Mine looked like this:

64" + 1" =  65 " Wide   X   22" + 8" + 1" = 31" Height  

Next we'll sew the end pieces onto the main piece of fabric, with right sides together

pin and sew. I didn't sew all the way down to the bottom edge, I wanted to make

sure I got a good fit with the corners first. I found it easiest to bring the frame in and 

put it on the counter, I put the cover over it and ended up  tweaking it a bit, I took it in

 about a 1/4 " at a time until I liked the fit. Then sewed down the entire length of it. 

After you have your fit finalized press all seams down on the front and back side of your 

fabric to insure professional looking seams.  

Step 3 - Mounting the Frame

 Before mounting the frame against our house I secured several pieces of 3/4" velcro along the
top edge, front edge and ends of the frame, as well as the fabric, measuring to be sure
 they match up.

We used three large bolts to secure the frame to our house, first drilling three holes into the

steel tubing frame and then aligning pilot holes on the house trim for the bolts. 

Step 4 - Tweak!

Secure the fabric to the velcro and tweak away, the velcro allows for some flexiblility as far as

adjusting, but unfortunately they'll all probably be a bit different at this point. I opted for a

looser more relaxed look in the end leaving a little slack in mine. It helped with the buckling

 you see at the corners. 

Hope you're inspired to find a teenager with some welding skills and give it a try!

Thanks, J ~ I couldn't have done it without you!  

diy black and white awning reveal...

Woo hoo, it's done!

It's been raining on my little diy striped awning all day long, I considered bringing it in. :) 

It feels kind of like having new shoes and it rains the first day you wear them!

I've always loved the charm of awnings, and have wanted to add one to the front

 of our home for awhile, it's fun driving around the block over and over by and seeing it.

 I wouldn't have ever considered diy-ing one, but having a diy blog has certainly propelled

 me to think of ways to diy anything!

Fun pictures today and the tutorial tomorrow...

I didn't realize how bad those evergreens look till now, they've been in

 there for at least five years, they're getting ripped out tomorrow.

Let's focus on the awning - I had my sweet neighbor come over and tell me what

 it needed, she thought a softer relaxed look was better than tightly stretched over the

 frame, and it made the buckles I was fretting about disappear. Unfortunately, I'd

 already taken out the seams, and tried adding drapery weights trying to find a solution.

 I went back and looked, some of my inspiration awnings have a relaxed look to them,

with soft wrinkles here and there, that was all it took for me to be finished!

A few of you asked if we're planning to leave it up year round, I think it has a 

summery vibe that doesn't fit with our Colorado winters. We also like to decorate for

 Christmas and I can't quite picture it with lights and garland. So, we'll be taking it down.

It will be fun tradition to look forward to bringing it out each spring. 

Looking out from inside, and a close up of the corner that sent me in search of retail therapy. :)  

BEFORE

 Stop by tomorrow for the details if you want to try one for your home!

Click on title for the tutorial: 

DIY Awning Tutorial

  

knock offs...

More challenges with the awning, I know I'll get there, but

when the going gets tough a little retail therapy always helps! 

They look like a knock off of the popular $875 Valentino Rockstud Cage Flat here

and you can save $855, because they're $19.99 at TJ Maxx,

I was expecting $39 or $49. 

Valentino Noir Rockstud Cage Flat

Great for fall before you break out your boots, you can dress them up or down.
Perfect therapy, I'm feeling the awning mojo coming back already!

Another fabulous Knock Off ...are you familiar with Beckie at Knock Off Decor? If not, you're
 in for some awesome inspiration! She features a knock off project every day from
Pottery Barn, Anthropologie, Ballard, Urban Outfitters, West Elm, Z Gallerie to name a few.
These are a couple recent faves...

twelveoeight.blogspot.com

DO or DIY 

A huge thank you to her for featuring my Restoration Hardware Garden Spheres,
if you have any knock off projects be sure to stop over and submit yours to share.
Or go check out the latest knock off feature!

Thanks for sticking with me when the projects don't go as planned, your
 encouragement and confidence keep me going! Along with a little shopping break. :)

tweaking the diy awning...

I thought for sure I was going to have a fun reveal for you today,

but instead I'm ripping out seams, tweaking it...ugh!

I tried so hard to get a nice tight fit over the frame, and of course, it's too tight at the

 corner on both sides, see where that big wrinkle is? Thought so.  

The good news...I don't have to rip out the entire seam.

The bad news...I have to take it down, and I made sure it was up there very secure!

Let the good times roll! :)